Still Have PS 3? This Is How To Keep It Clean

If you are still using your PlayStation 3, your list of games is likely bigger than you think. Unfortunately, it’s not always easy to take care of older electronics since they can accumulate dust and other debris over time. Fortunately, the online market has provided many tools that make keeping your PlayStation 3 tidy much easier and less stressful. If you want to know more about cleaning tools and tips, you can refer to Useful content on

Clean Dust from A PS3  

Every gamer knows that dust can make your games hard to play. Dust on the faceplate or inside the console can cause issues for PS3 users. You will want to remove the dust from it before playing your game or watching a movie. If you are experiencing problems with your console, this guide will show you how to fix them.

Open the case by removing the screws with a head screwdriver. Remove the heat sink by gently pulling it outwards while simultaneously pushing inwards on its hinges until it pops up vertically. Using an old toothbrush, thoroughly scrub any dust and dirt off the heat sink with soap and water before placing it back inside.

How To Clean The Inside Of A PS3?  

If you want to clean the inside of your PlayStation 3, then you will want to use a blower can, or compressed air can blow out any loose particles of dust on your console’s circuit board and hard drive. This will make sure that there is no dust build-up on your system so you can play or watch a movie with ease.

If you are going to be doing this in small increments at a time, then make sure that you turn off your console and unplug it from the wall before working on it. You will want to blow out all of the dust within the system. You never want to blow compressed air into the hard drive itself since it can permanently damage the hard drive. After cleaning inside a PS3, you experienced that your device runs smoothly than before

Self Cleaning Tips

First, you have to clean the case surface from dust with an antiseptic wiper and gently rub all the corners of PS3. You did not wipe the slots or the ports of the device. If you want to clean all the ports and slots of the PS3 device, you should use a cotton swab because it does not harm the port and slots. You can also use cheap toothbrushes that will have a lot of bristles. One of the most important things is to regularly remove dust and dirt from the heat sink of your PS3 system and this is a large piece of metal on which the fan and hard drive coolant pipes are located.

If you are still using PS3, you should take care of your device from dust and dirt to enjoy uninterrupted entertainment and gaming experience.

Leave a Reply

Your email address will not be published.